Switch handle function description
This product supports Bluetooth/wired/2.4G connection in three ways:
1,Method one, support the Bluetooth connection of SWITCH/Android devices;
2,Method two, support the wired connection of PC/Android devices;
3,Method three, support 2.4G (receiver) connection of PC/Android device/PS3 host;
1. Bluetooth connection;
1. SWITCH host connection: Long press Y+HOME for 3 seconds, the indicator flashes cyclically to enter the SWITCH pairing state, and the connection is successful and the host independently sends the channel light to be on;
2. Android connection: Press and hold B+HOME for 3 seconds, the No. 1 indicator light flashes quickly to enter the Android device pairing state, and the connection is successful and No. 1 lights up continuously;
2. Wired connection;
1. PC wired connection: directly plug in the line, lights 1-3 flashing, default XINPUT mode, long press select(-)+start(+) for three seconds to switch to DINPUT mode (lights 2-4 flashing);
2. Android wired connection: directly plug in the line and the 1st light flashes;
3. 2.4G (receiver) connection;
1. PC 2.4G connection: Long press L1+HOME for 3 seconds, 4 indicator lights flash quickly to enter the pairing state, the connection is successful, the 1-2 indicator lights are on, the default XINPUT mode, long press select(-)+start(+ ) Switch to DINPUT mode in three seconds (LED 3-4 flashes);
2. Android device 2.4G connection: Long press L1+HOME for 3 seconds, 4 indicator lights flash quickly to enter the pairing state, the connection is successful, the 3rd indicator light is on;
3. PS3 host 2.4G connection: Long press L1+HOME for 3 seconds, 4 indicator lights will flash quickly to enter the pairing state, if the connection is successful, the PS3 host will automatically send the channel light to stay on;
Back programming button quick turn off
1. Off on the left: turn off the programming key function;
2. On the right is on: Turn on the programming key function. After turning on, press the programmed key + START (+) to program the back key, and each key can be programmed with 6 keys;
Vibration adjustment
Press the up/down + TURBO keys together to adjust the motor vibration intensity, which can be adjusted to 4 levels (the minimum level is to turn off the vibration), and the default is medium intensity vibration;
TURBO combo frequency adjustment
Press (-/+)+TURBO together, the combo frequency can be adjusted, 3 levels (5/10/15 times per second), the default is 10 times/S;
Battery synchronization
In Switch mode, the power of the handle should be synchronized with the power of the handle displayed by the host;
Low voltage alarm
In wireless mode connection, the power of the handle is too low, and the current mode indicator light flashes slowly;
Recharge
4 indicator lights flash slowly when charging, and go out when fully charged;
Optimize the problem of 3D virtual position change after 3D and cross keys are exchanged
After the 3D and cross keys are swapped, press and hold "L1" + "START" for 3 seconds to re-correct the left 3D virtual position, accompanied by 1S vibration
20190912
Hold down R3 and plug in the USB cable to upgrade the computer
2019-9-12_ZXD1507_SWITCH_C120_0xFD76_ver_04
ZXD1507 (KL-19A0) optimizes the upgrade package for test stand button and RGB light abnormalities
KL-19A0.V2.0
1. L1 R1 has no function
2. When connecting the light stand, the RGB light sometimes turns on red without running a horse.
3. TURBO has no function
4. There is no horse racing after the colorful lights are connected
